The Simple Solution for Tackling Mold and Peeling Walls

No homeowner enjoys discovering mold issues. Just hearing the word ‘mold’ might make you feel anxious. But if you’re facing mold or peeling paint problems, don’t stress. You can solve these issues without calling in a costly technician—just a bit of effort is needed.

Mold is a frequent problem in many houses. Over time, it can worsen, eventually causing paint to blister or peel. When this happens, it’s time for action.

Dealing with Mold

Start by removing visible mold. Use a dry toothbrush to gently scrub moldy spots. A cloth soaked in alcohol can be used to wipe the walls, helping them dry properly.

For a thorough clean, mix bleach and water in a 1:99 ratio. Spray the solution directly on moldy areas using an empty spray bottle.

Applying this solution eliminates mold effectively, and strengthening the mixture is helpful in humid weather.

After treatment, let the wall dry and then smooth the surface with sandpaper. Apply a waterproof primer before repainting.

Fixing Blistered Walls

If you see any blistering or peeling paint, it needs removal. Poor quality wall filler should be scraped off and replaced with better materials.

For small or localized blisters, scrape them off smoothly. Primer and paint can be applied directly to the area. For larger blisters, remove the entire section and reapply plaster after drying.

Proper waterproofing during repairs or decoration minimizes future issues.

It’s best to avoid painting during the rainy season. When painting, choose matching primer and paint products for the best results.

Handling Peeling Walls

Peeling walls not only look unattractive but can also create dirt and dust. Here’s how to tackle this problem.

Scrape peeling paint off the wall and remove filler. Smooth the edges with sandpaper, then apply primer. Once the primer dries, repaint the area.

For more severe damage, you might need to remove a significant amount of the damaged wall. Treat the surface with primer before repainting.

If the peeling area is badly damaged, dampen it with water and scrape it with a scraper. This allows you to remove paint without stirring up dust and mold.